Can't find the information you are looking for here? Then leave a message over on our WinBatch Tech Support Forum.
Keywords: rasmon
To determine if you should use rasmon instead of rasmon2 (RasmonBeta) examine the IMPORTANT INFO below!!
The Program needs to be have all files located in the C:\RasMon folder. The program also requires the dumpel.exe from the NT4 Resource Kit. The dumpel.exe included with the 3.51 does not allow for the correct extraction of information. The program was tested with the dumpel.exe from NT4 Resource Kit on a 3.51 server!
RasMon can be ran from any machine in the domain and Rasmon2 (RasmonBeta) must be local to the RAS Server.
At last check the dumpel.exe was at:
ftp.micosoft.com/bussys/winnt/winnt-public/reskit/nt40Files located in the C:\RasMon folder are:
dumpel.exe From NT4 ResKit (Works on both 3.51 and 4) rasmon.exe File doing the work rasmon.ini Configuration File (Requires Setup!) rasmon2.exe File doing the work rasmon2.ini Configuration File (Requires Setup!) help.txt This File:)The program will create all other files necessary to operate. Files it will create are:
WBDBP32I.dll File required for program Cheater.txt Listing of users logged on to more than 1 port Ras.txt File generated by program and dumpel.exe Ras1.txt File generated by programThe format of the RasMon.ini should be as follows:
===================example begins below=============== DomainName ServerName ComX ComX+1 ComX+2 ComX+N ===================example ended======================The DomainName is the name of your domain
Note they do not have to be in sequence only the ports you want to monitor.
The format of the RasMon2.ini should be as follows:
===============example begins below=============== ComX ComX+1 ComX+2 ComX+N ==============example ended======================The DomainName is the name of your domain
Note they do not have to be in sequence only the ports you want to monitor.
*******************IMPORTANT INFO**************
Start the rasmon.exe and then kill it. Examine the ras.txt file
if the file format is as follows then use rasmon.exe
20017 DomainName username COM6 20017 DomainName username COM5 20019 DomainName username COM5 20017 DomainName username COM6if the file format is as follows then use rasmon2.exe
20017 The user DomainName\username has connected and has been successfully authenticated on port COM8. 20019 The user DomainName\username disconnected from port COM8. 20017 The user DomainName\username has connected and has been successfully authenticated on port COM8. 20019 The user DomainName\username has disconnected from port COM5.These versions will be merged in the future.
*********************************************************************
To download the zip file:
rasmon.zip
Article ID: W13790
Filename: Rasmon.txt
File Created: 2017:08:29:11:58:54
Last Updated: 2017:08:29:11:58:54